China China New Product Bucket Wear Protection - WD1000/1100 Wear Plate – Wodon factory and manufacturers

China New Product Bucket Wear Protection - WD1000/1100 Wear Plate – Wodon

Product Detail

Feedback (2)

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Hardfacing Wires Coal Mine, Duaplate, Wear Plate 1500x3000mm, Our products are widely used in many industrial fields. Our Company Services Division in good faith for the purpose of the quality of survival. All for customer service.

China New Product Bucket Wear Protection - WD1000/1100 Wear Plate – Wodon Detail:

WD1000/WD1100 series
Abrasion Resistant Chromium Carbide Overlay

WD1000/WD1100 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of flux cored arc welding. WD1000/WD1100 wear plate is suitable for application involving high abrasion and low to medium impact.

● WD1000/WD1100 series:

Common chromium carbide wear plates produced by flux cored arc welding; Suited for applications involving high abrasion and low to medium impact.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Fe	HRC 58-63	1400*3400	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Fe	Other
	3.0-5.0	15.0-35.0	1.0-3.0	1.0-3.0	Bal.	-
Hardness	HRC 58-65
Standard Thickness(mm)	3+3; 4+4; 5+5; 6+4; 6+6; 8+4; 8+6; 8+8; 10+10; 12+12; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003400; 15003000; 2000*3000; (Customized size available)
ASTM G65 Procedure A	0.12 – 0.18g
Operating Temperature	<400 ℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

Remark:

We can customize the plates in different sizes and thickness based on customer’s drawings. we can also cut, bend and weld the wear plates into specific shapes and parts

Characteristics:

* By open arc welding technology

* Chemical Composition: C: 3.0-4.5% Cr: 15-35%

* Chromium carbide Cr7C3 volume fraction about 40%

* The thickness of wear resistant layer can reach up to 50 mm

* Heat resistance up to 600°C

* Lager standard wear resistant area 1400*3400 mm; 1500*3000 mm; 2000*3000 mm

* Better flatness with smooth surface

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

Our merchandise are broadly identified and trusted by end users and can satisfy continually developing economic and social requires for China New Product Bucket Wear Protection - WD1000/1100 Wear Plate – Wodon , The product will supply to all over the world, such as: Mozambique, America, Seattle, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.

Bucket Wear Parts