China Quality Inspection for Chrome Carbide Overlay - WD1000/1100 Wear Plate – Wodon factory and manufacturers

Quality Inspection for Chrome Carbide Overlay - WD1000/1100 Wear Plate – Wodon

Product Detail

Feedback (2)

With our loaded working experience and thoughtful products and services, we've got been acknowledged as a reputable supplier for most international buyers for Wear Protection, Grinder Roll, Powder Separator Blade, We have been in procedure for more than 10 years. We're dedicated to excellent solutions and consumer aid. We invite you to definitely pay a visit to our business for a personalized tour and advanced small business guidance.

Quality Inspection for Chrome Carbide Overlay - WD1000/1100 Wear Plate – Wodon Detail:

production introduction

WD1000/WD1100 series
Abrasion Resistant Chromium Carbide Overlay

WD1000/WD1100 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of flux cored arc welding. WD1000/WD1100 wear plate is suitable for application involving high abrasion and low to medium impact.

● WD1000/WD1100 series:

Common chromium carbide wear plates produced by flux cored arc welding; Suited for applications involving high abrasion and low to medium impact.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Fe	HRC 58-63	1400*3400	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Fe	Other
	3.0-5.0	15.0-35.0	1.0-3.0	1.0-3.0	Bal.	-
Hardness	HRC 58-65
Standard Thickness(mm)	3+3; 4+4; 5+5; 6+4; 6+6; 8+4; 8+6; 8+8; 10+10; 12+12; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003400; 15003000; 2000*3000; (Customized size available)
ASTM G65 Procedure A	0.12 – 0.18g
Operating Temperature	<400 ℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

We can customize the plates in different sizes and thickness based on customer’s drawings. we can also cut, bend and weld the wear plates into specific shapes and parts

Characteristics:

* Chromium carbide overlay wear resistant plate
* Chemical Composition: C: 3.0-5.0% Cr: 18-30%
* Chromium carbide Cr7C3 volume fraction about 40%
* The thickness of wear resistant layer can reach up to 50 mm
* Heat resistance up to 600°C
* Lager standard wear resistant area 1400*3400mm, 1500*3000mm, 2000*3000mm
* Better flatness with smooth surface
* Hardness: HRC58-65

open arc wear plate
open arc wear plate04
open arc wear plate02
open arc wear plate03

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Quality Inspection for Chrome Carbide Overlay - WD1000/1100 Wear Plate – Wodon , The product will supply to all over the world, such as: Naples, Poland, Saudi Arabia, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products have been exported to more than 15 countries in the world and have been widely used by customers.

Arcoplate

Bucket Wear Protection

Carbide Overlay Plate

Chrome Carbide Wear Plate

Chromium Carbide Overlay Plate

Chromium Carbide Wear Liner

Chromium Carbide Wear Plates

Clad Plate

Mining Liner Wear Plates

Wear Plate 1500x3000mm

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!